You are here: Experiment Guide > Imaging Modes > Piezoresponse Force Microscopy > Image the written area

Image the Written Area

  1. Increase the Scan Size to 3 μm:

Note the written area between 0.5 μm and 2.5 μm.

  1. Increase the Aspect Ratio to 4:

Previous Steps:

  1. Piezoresponse Procedure Set Up
  2. Write an Area in the Piezoelectric Sample

Next Steps:

  1. Image the Written Area
  2. Optimize the Image
  3. Simultaneous Multiple Optimizations

 

www.bruker.com Bruker, Inc.
www.brukerafmprobes.com 112 Robin Hill Rd.
http://nanoscaleworld.bruker-axs.com Santa Barbara, CA 93117
   
  Customer Support: (800) 873-9750
  Copyright 2010, 2011. All Rights Reserved.